null

Cleaning & Disinfecting Top Dog Personal Protective Equipment (PPE)

Gowns: (SKUs 8603x/8604x)

Aprons: (6 mil SKUs 8001x/8002x & 8 mil SKUs 8101x/8102x)

Sleeves: (SKUs 8401x/8402x)

IMPORTANT: Top Dog™ personal protective equipment (PPE) products will not absorb any fluids or substances at all. The polyurethane has outstanding antimicrobial qualities against bacteria. Bleach will not harm the product or discolor it in any way. Cleaning and disinfecting is easily done by either using a regular clothes washing machine or through a dip and hang air-dry process.

Regular Washing Machine Application

  • Place product in the washing machine in either cold or hot water, depending upon your protocols
  • Add bleach or any other disinfectant and soaps to the desired concentration levels, depending upon your protocols
  • Run the full regular wash cycle; use the heavy duty cycle, if the substance on the surface of the product is particularly sticky
  • If substance is dried onto to the surface of the product, successive quick and hard snapping/shaking of the product will usually cause the dried substance to fall off of the surface. This will reduce the amount of foreign substance that will potentially clog the washing machine or make the water extra dirty, thereby reducing the effectiveness of the washing machine process
  • If the foreign substance is a flour-based paste-like material, pre-soak the product for 15 minutes before placing in the washing machine. Product like sleeves may need to be turned inside out and presoaked a second time
  • A heavy concentration of a flour-based paste-like material on the product will very likely require two or more washings to ensure that the flour-based paste-like material is completely eliminated from the surface of the product. Product like sleeves may need to be turned inside out and washed one more time depending upon the amount of flour-based paste-like material present. The flour-based paste-like material becomes an outstanding glue when wet and will cause the polyurethane to stick together if any of it remains on the product surface after washing
  • The spin cycle will remove some of the surface water on the product; hang to product on hooks or hangars to air dry; if necessary, keeping the product from touching a wall or each other will speed up the drying time

Dip and Hang to Air-Dry Application

  • Dip, and swish the product around well, in a drum of cleaning/disinfectant fluid, depending upon your protocols
  • A heavy concentration of a flour-based paste-like material on the product will very likely require two or more washings to ensure that the flour-based paste-like material is completely eliminated from the surface of the product (see more details above on this type of cleaning challenge)
  • Hang product on hooks or hangars to air dry; keeping the product from touching a wall or each other will speed up the drying time
  • DRYING USING A DRYER - If heat is required – maximum temperature cannot exceed 180°F/82°C
  • Set dryer on “air fluff” cycle and tumble for 10-15 minutes to remove the remaining surface water after the spin cycle in the washing machine is completed
  • If heat is a required protocol, set dryer on regular heat cycle for 10-15 minutes
  • If the dryer drum sides has a hot spot(s), place the product in a laundry mesh bag to keep the product from touching these hot spots; otherwise, the product may be damaged from coming in contact with these hot spots

View our Top Dog personal protective equipment (PPE) products here.